Gas Detection Solutions

Smart Gas Transmitters GT-2500-series

The GT-2500-series Transmitter has a LED Display which is resistant to poisoning and etching and has digital display of gas concentration on it. The Gas Transmitter has the feature of easy handling and programming with 3 keys for weatherproof model and can be programmed using remote control from 10 meters in line of site distance. The Gas Transmitter has non-intrusive programming and password protected programming with password changing facility. This Gas Transmitter has optional alarm relay contacts with two configurable alarm levels and one relay for fail safe relay.

The GT-2500-series are available in weatherproof enclosures and also in CMRI tested flameproof enclosures.

  • Resistant to poising and etching
  • Digital display of gas concentration on LED display.
  • Easy handling and programming with 3 keys for weatherproof model
  • Can be programmed using remote control from 10 meters in line of site distance.
  • Non-intrusive programming
  • Password protected programming with password changing facility
  • Optional alarm relay contacts with two configurable alarm levels and one relay for fail safe relay.

Smart Gas Analyzer GA-3500-series

The GA-3500-series Smart Gas Analyzer is a micro controller based gas transmitter with LED display, that continuously monitors Oxygen / Toxic / Combustible gases in PPM / %V/V / %LEL / PPB depending upon the gas selected.

It is ideally suited for harsh environment in industries where human interference is not possible in toxic or combustible gases area. It is capable of displaying the gas concentration and transmits the data to control units through standard 4-20 mA output.

  • Provides a fast and reliable output by using Electro Chemical/ Pellister Sensor Technology.
  • Optimized for detection of smallest leak of Oxygen, Toxic and Combustible Gases
  • Highly resistant to poisoning and etching.
  • Capable of detecting down to PPM, % LEL & % V/V.
  • Optional Alarm relay contacts with two configurable Alarm levels & one Relay for fail safe relay.
  • Optional STEL and TWA set points can be configured for Toxic Gases.
  • Optional RS-485 communication port with MODBUS RTU Protocol.
  • Programmable time setting for pump operation to cleaning dust.
  • Digital display of Gas Concentration on LED Display for GA-3500.
  • Standard 4-20mA signal output with configurable range.
  • Easy handling and programming with 3 keys for Panel Mount, Weatherproof & Flameproof Models.
  • Password protected programming with password changing facility.
  • Show peak value of gas concentration with a single key press.

Smart Gas Analyzer GA-3511-series

The GA-3511-series Smart Gas Analyzer is a micro controller based gas transmitter LED display, that continuously monitors Oxygen / Toxic / Combustible gases in PPM / %V/V / %LEL / PPB depending upon the gas selected.

It is ideally suited for harsh environment in industries where human interference is not possible in toxic or combustible gases area. It is capable of displaying the gas concentration and transmits the data to control units through standard 4-20 mA output.

  • Provides a fast and reliable output by using Electro Chemical/ Pellister Sensor Technology.
  • Optimized for detection of smallest leak of Oxygen, Toxic and Combustible Gases.
  • Highly resistant to poisoning and etching.
  • Capable of detecting down to PPM, %LEL& %VIV.
  • Digital display of Gas Concentration on LCD Display for GA-3511.
  • Standard 4-20mA signal output with configurable range.
  • One man Auto software Gas Calibration.
  • Optional Alarm relay contacts with two configurable Alarm levels & one Relay for fail safe relay.
  • Optional STEL and TWA set points can be configured for Toxic Gases.
  • Optional RS-485 communication port with MODBUS RTU Protocol.
  • Easy handling and programming with 3 keys for Panel Mount, Weatherproof & Flameproof Models.
  • Can be programmed using Remote Control from 10 meters in line of site distance.
  • Non-intrusive programming for flameproof model using magnetic pen.
  • Password protected programming with password changing facility.

Trace Oxygen Analyzer OGA-3500-PPM

AEPL series ‘OGA-3500-PPM’ Trace Oxygen Analyser is a micro-controller based equipment designed for measuring the concentration of oxygen (ppm) content in a tube through which inert gas(nitrogen or argon) is flowing. It is capable of measuring the low concentration of Oxygen in the range of 0 to 199.9 or 0 to 1999 ppm.

It is based on Electrochemical (Galvanic cell) type measurement method. The flow meter can be used with pressurized sources like gas cylinder or pipeline.

  • Microcontroller based latest accurate, Reliable & High performance technology that eliminates
  • False alarms
  • Advanced warning and Dual level Alarm output
  • Easy one man calibration at site
  • Provides fast and reliable output using Electro chemical sensor technology.
  • User friendly set parameters facility
  • Password protected parameters including Alarm set points
  • Settable On time , Off time , Trigger or Cyclic or continuous mode for pump
  • Settable Offset , Hysteresis for Alarm
  • Digital Display of Gas concentration with 4 to 20mA DC & 0-1 VDC isolated recorder outputs.

Single Channel Gas Monitor GM-1100-series

Single Channel Gas Alert Monitor GM-1100-series has the feature of dual display of gas concentration and set point/ unit of gas and is micro controller based type in nature.

This Monitor has the feature of warning and alarm output and audio visual alarm indication. The Monitor has two independent alarm relay output and has the feature of easy one man calibration at site.

The Single Gas Alert Monitor has password protected programming with password changing facility and has user friendly operation.

  • Dual display of gas concentration and set point/ unit of gas
  • Micro controller based
  • Accurate and efficient performance
  • Warning and alarm output
  • Audio visual alarm indication
  • Easy one man calibration at site
  • Suitable in hazardous area
  • User friendly
  • Password protected programming with password changing facility.

Dual Channel Gas Monitor GM-2200-series

Dual Channel Gas Monitor GM-2200-sereis has two independent displays for any two gas detector selected by user and is offered in micro controller based manner that ensures accurate performance that eliminates false alarm.

The Gas Monitor has long term stability and audio visual gas leakage indication. The Gas Monitor has one individual alarm relay contact separate for each channel and is offered in wall mounted design.

The Dual Channel Gas Monitor is suitable for hazardous area and has password protected programming feature with password change facility.

  • Two independent displays for any two gas detector selected by user
  • Micro controller based manner that ensures accurate performance that eliminates false alarm
  • Audio visual gas leakage indication.
  • One individual alarm relay contact separate for each channel
  • Wall mounted design
  • Suitable for hazardous area and has password protected programming feature with password change facility.
  • Long term stability.

Multichannel Gas Monitor RK-220-Panel-series

These Rack Type Multi-channel Gas Monitors come in different ranges starting from 4-Channel, 8-Channel, 16-Channel, 32-Channel, 80-Channel and so on, and are further easily expandable as per Client requirement.

It has fail-safe operational design and has modular design card with individual display with bar graph indication for each transmitter. It requires easy maintenance and is designed with individual alarm relay/ open collector outputs for each gas transmitter.The Monitor is offered in such a manner that the gas range, resolution, control action, latch facility is programmable by users/ multilayer password protected. The Rack Type Multi-channel Gas Monitor has easy automatic software calibration and inhibits/ service mode that ensures that at the time of maintenance alarm relay becomes inactive.

  • Fail safe operational design
  • Modular design card with individual display with bar graph indication for each transmitter
  • Easily expandable
  • Requires easy maintenance
  • Designed with individual alarm relay/ open collector outputs for each gas transmitter
  • Offered in such a manner that gas range, resolution, control action, latch facility is programmable by users/ multilayer password protected
  • Easy automatic software calibration and inhibits/ service mode that ensures that at the time of maintenance alarm relay become inactive.